Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 101)

7–7 Creating Multistate Indicators and Drawing Lines
Publication 2711E-818 – January 1998
Adding the Second Stapler Multistate Indicator
The second Multistate Indicator is outside the copier drawing. It also
must have four states that correspond to those of the first object.
1. Create the Multistate Indicator object and position it on the
screen, outside of the copier illustration.
If you wish, you can select an existing Multistate Indicator object,
and use the Duplicate command. Then you can edit the new
object so that the text reads
Stapler in each state.
Or you can draw the object, following the steps described
previously, and define each state separately.