Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 103)

7–9 Creating Multistate Indicators and Drawing Lines
Publication 2711E-818 – January 1998
To add an arrow:
1. Follow the steps for importing a graphic image, and import
arrowlf.bmp from the C:\AB\PB1400E\IMAGES\ARROWS
directory.
2. Place the arrow on the screen, and position it at the left end of the
line.
3. Change the arrow’s colors to match those of the line.
When you’re finished, your stapler illustration should look
something like this.
When you’ve finished fine-tuning the design, validate the screen, as
described in Chapter 6.
Fix all problems in the screen and revalidate it to ensure there are no
further problems. Then close the screen, and save the application.
Validating the Screen and
Saving the Application