Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 23)

2–2 Setting Up PanelBuilder 1400e
Publication 2711E-818 – January 1998
Application File Transfer Equipment
One or more of the following equipment is needed for transferring
applications:
•
an RS-232 serial port for uploading or downloading applications
with an Allen-Bradley upload/download cable
•
a Data Highway Plus network card and connection (KT, KTX,
KF)
•
a ControlNet network card and connection (1784-KTCX,
KTCX15)
For more information about the use of this optional equipment, see
the PanelView 1200/1400e Transfer Utility User Manual and the
PanelView 1000e, 1200e, and 1400e Operator Terminals User
Manual.
PanelView Terminal Requirements for Running PanelBuilder
1400e Applications
You can run applications created in PanelBuilder 1400e, Version 4,
on the following PanelView terminals:
•
PanelView 1000e terminals, Series A and later, running Version 3
or later firmware
•
PanelView 1200 Series F or later color terminals that have been
enhanced with PanelView 1200 Enhancement Kits (Catalog
Number 2711E-U1B12C), and are running Version 1 or later
firmware
•
PanelView 1200e Series A or later terminals, running Version 1
or later firmware
•
PanelView 1400e Series A or later terminals, running Version 1
or later firmware
Note: All other PanelView 1200 terminals will run only
applications created in PanelBuilder DOS (Catalog Number
2711-ND1) or PanelBuilder 1200 (Catalog Number
2711-ND1W). They will not run PanelBuilder 1400e
applications.
"