Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 26)

2–5 Setting Up PanelBuilder 1400e
Publication 2711E-818 – January 1998
If you are installing on Windows NT, the Select Components
dialog box does not appear. Version 4 is automatically selected.
6. In the Choose Applications dialog box, choose PanelBuilder as
the application you want to install.
You can choose more than one application to install. Choose File
Transfer Utility for the ability to transfer application files
between a computer and the PanelView terminal. Choose Serial
Firmware Upgrade for the ability to upgrade the firmware on
your PanelView terminals using your computer.
Then choose Next.
7. In the registration window, enter your user name and company
name. After you enter the required information, choose Next.
8. In the confirmation window, verify the user information you have
entered. Select Yes to proceed, or No to edit the user information.
9. Close all open Windows applications. If you have done so,
choose Next.
10. In the registration window, enter registration information about
your copy of PanelBuilder 1400e.
The serial number for your software is on the Software
Registration card that was shipped with your software.
11. The Installation Options dialog box lists the program components
you are installing and the amount of hard disk space required for
each.
Choose the components you want to install and click Continue.