Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 74)

Chapter
5
Publication 2711E-818 – January 1998
Creating Buttons and
Importing Graphics
This chapter shows you how to add two Goto Screen buttons to the
Initial Screen. It includes these topics:
•
creating the buttons
•
resizing, moving, and configuring the appearance of the buttons
This chapter also provides instructions for adding a graphic image to
the screen.
When the application is running on the PanelView terminal, the
operator uses Goto Screen buttons to change to other application
screens. The operator can call up only the Setup and View screens
from the Initial Screen. However, the application has two more
screens: the Report and Alarm History screens. You want the
operator to be able to call up all four screens.
To enable the operator to do this, you will add two Goto Screen
buttons.
Note: This and all following screen illustrations are of keypad
application screens. Touch screen application screens don’t show
function key designations and the buttons are positioned further
apart.
Creating and Configuring
the First Goto Screen
Button
"