Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 34)

2–13 Setting Up PanelBuilder 1400e
Publication 2711E-818 – January 1998
6. The Installation Options dialog box lists the program components
you are installing and the amount of hard disk space required for
each.
Choose the components you want to install and click Continue.
You can install any or all of the following options:
•
PanelBuilder 1400e
•
Help files
•
Demo files—These files demonstrate sample PanelBuilder
1400e applications.
•
Tutorial files—These files are required for the tutorial outlined
in this manual.
The following files are part of the install set and can’t be
deselected:
•
OLE/ODBC System Files—These files are necessary for
running PanelBuilder 1400e.
If disk space is limited, you may want to install only PanelBuilder
1400e. However, if you have enough space, we strongly
recommend you also install the Help files.
7. Change the destination drive and directory, if desired. By default,
this is C:\AB\PB1400E. To change the destination drive or
directory, type the new drive and/or directory in the Directory
field.
If the Rockwell shared files have been installed previously, you
cannot change their location. If they haven’t yet been installed,
you can change the default directory.