Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started - Manual (Page 98)

7–4 Creating Multistate Indicators and Drawing Lines
Publication 2711E-818 – January 1998
New Multistate Indicator
Now you can configure the states.
Configuring the States
Unless you’ve set different defaults for the Multistate Indicator, the
new Multistate Indicator automatically has four states assigned. By
default, it is at State 0. This is the state that appears when the copier
is not active, and there are no problems.
To configure these states:
1. Configure State 0 as follows:
A. Select the object. Change the foreground color to light grey
and the background color to blue.
B. Create the text label n/a for “not active.”
You’ve defined the first state (State 0) of the object. Now you can
configure the remaining states.
2. With the object (but not the text) selected, choose Next State from
the View menu or press ALT+N . The object is now at State 1.
3. Configure State 1 as follows:
A. Create the label OK to indicate that everything is functioning
correctly.
B. Change the foreground color to blue and the background
color to white.