Rockwell Automation 2711E-ND1 PanelBuilder 1400E Configurator Software Getting Started User Manual
Page 39
3–3
A Brief Tour of PanelBuilder 1400e
Publication 2711E-818 – January 1998
Tip: To open an existing application so you can follow along as
you read this chapter, double-click the PB1400e folder to display
the DEMO and TUTORIAL folders, then double-click DEMO or
TUTORIAL and select an application.
Note: The TUTORIAL folder contains two Remote I/O
applications—one for keypad terminals and one for touch screen
terminals as well as four Modbus applications—two for keypad
terminals and two for touch screen terminals. The DEMO folder
contains two Data Highway Plus applications—one for keypad
and one for touch screen terminals.
2. Select the application you want to open.
3. Choose OK.
If your system doesn’t have enough memory to run the
application, the following message appears:
“PanelBuilder 1400e has detected low memory resources”
You must quit one or more currently open software applications,
or currently open applications in PanelBuilder 1400e, before you
can open another PanelBuilder 1400e application.
"
"