Rockwell Automation 1794-XXXX FLEX I/O High-Density Analog Modules - Manual (Page 20)

Publication 1794-UM062A-EN-P - September 2012
12 Install Your FLEX I/O Module
Use the mounting kit Cat. No. 1794-NM1 for panel/wall mounting.
To install the mounting plate on a wall or panel:
1. Lay out the required points on the wall/panel as shown in the drilling
dimension drawing.
Drilling Dimensions for Panel or Wall Mounting of FLEX I/O
2. Drill the necessary holes for the #6 self-tapping mounting screws.
1.4
(35.5)
0 1
7
2
3
4 6
7
8
9
1
2
3
4
45323
millimeter
(inch)
Description Description
1 Mounting plate for adapter 3 Terminal base unit (not included)
2 #6 Self-tapping screws 4 Adapter module (not included)
(1.4)
35.5
21 (0.83)
(2.3)
58.5
(1.4)
35.5
(Inches)
Millimeters
(2.3)
58.5
(1.4)
35.5
45327