Rockwell Automation 1794-XXXX FLEX I/O High-Density Analog Modules - Manual (Page 5)

v Publication 1794-UM062A-EN-P - September 2012
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
Who Should Use this
Manual You must be able to program and operate an Allen-Bradley programmable
controller to make efficient use of your FLEX I/O modules. In particular, you
must know how to program block transfers.
We assume that you know how to do this in this manual. If you do not, refer to
the appropriate programming and operations manual before you attempt to
program your modules.
Purpose of this Manual This manual shows you how to use your FLEX I/O Analog modules with
Allen-Bradley programmable controllers. The manual helps you install, program
and troubleshoot your modules.
About the Vocabulary In this manual, we refer to:
• the analog input or analog output module as the "input module" or "output
module"
• the Programmable Controller as the “controller”
For Information About See
Overview of FLEX I/O and Your Analog Module Chapter 1
Install Your FLEX I/O Module Chapter 2
Write Configuration to and Read Status from Your Module Chapter 3
Communicate With Your Module Chapter 4
Specifications Appendix A
Differences Between Series Appendix B
Data Tables Appendix C
Module Programming Appendix D