Rockwell Automation 1794-XXXX FLEX I/O High-Density Analog Modules - Manual (Page 26)

Publication 1794-UM062A-EN-P - September 2012
18 Install Your FLEX I/O Module
Current signal I A-8
Current common RET
A-9 (1)
Voltage signal V A-10
Voltage common RET
A-11
(1)
Current signal I A-12
Current common RET
A-13
(1)
Voltage signal V A-14
Voltage common RET
A-15
(1)
24V DC common
B-16…33
(2)
+24V 1794-TB2 – C-34…51
1794-TB3 – C-34…51
(1) Terminals 1, 3, 5, 7, 9, 11, 13 and 15 are connected in the terminal base unit.
(2)
Terminals 16…33 are internally connected in the terminal base unit.
Wire Connections for 1794-TB2, and 1794-TB3 using the 1794-OE8 Module
Channel Signal Type Label
Markings 1794-TB2 and 1794-TB3
Output