Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 246)

FĆ2 AutoMax Programming Executive Version 3.x
LOC_PORT NUMERIC This rack's port on local head, if
applicable (0Ć3)
LEVEL NUMERIC The code identifying this rack's location in
the remote I/O topology (see the diagram
below)
RACK_PART NUMERIC The rack part code from the rack
permanent table
LOCATION CHARACTER The physical location of this rack
DESC CHARACTER The description of this rack
ENGINEER CHARACTER The user responsible for this rack
Database: $CARD.DBF
FIELD
TYPE DESCRIPTION
MAST_SLOT NUMERIC The slot in the master rack which contains
this card or which contains the remote I/O
card which is the remote I/O network
master (00Ć15)
REM_DROP NUMERIC If this card is in a remote rack, this is the
drop number for that remote rack (1Ć7);
otherwise, it is 0
PORTNUMERIC Port on remote head, if applicable (0Ć3)
LOC_PORTNUMERIC Port on local head, if applicable (0Ć3)
LEVEL NUMERIC The code identifying this card's location in
the remote I/O topology (see the diagram
below)
SLOTNUMERIC T he slot number containing this card
CARD_PARTNUMERIC T he card part code from the card
permanent table
NETWORK CHARACTER Network identifier; for network cards only
(AĆZ)
NET_DEPTH NUMERIC Network depth; for network cards only
(1Ć55)
NET_DROP NUMERIC Drop number; for network and gateway
cards only
DESC CHARACTER The description of this card
ENGINEER CHARACTER The user responsible for this card
WIRE_NOTE1 NUMERIC For AutoMax Processors (M/N 57C430A,
57C431, and 57C435), the high order byte of
the AutoMax Processor tick rate (in
microseconds)
For the UDC module (B/M 57552 and
B/M 57652), the drive type for drive A
(see Parameter Record Types table for
values)