Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 264)

LĆ2 AutoMax Programming Executive Version 3.x
System: 135792 Page: 1
Date: 03/19/93
Customer:
Engineer:bagwell
Quant Part Number Description
1 45C1 Digital Input/Output Rail
6 45C40 Dual 120VAC/DC, Input
2 45C60 Dual 120VAC Output (2 Amps)
1 57C330 Remote I/O Head
1 57C332 AutoMax 10 Card Slot Rack
1 57C404 Network Interface
1 57C416 Remote I/O Interface
1 57C430 AutoMax 6010 Processor
1 57C552 Universal Drive Controller Interface
1 60000 Power Module Processor
1 60001 Power Module resolver feedback
1 60002 Power Module Technology - DC Drive
1 61C346 Analog Rail, 4 Channel 0-10VDC Input
1 GEN32 Generic card with 32 registers
1 GEN32K Generic card with 32,768 registers
1 UDCPMI AutoMax UDC PMI 3 Card Slot Rack
System: 135792 Page: 2
Date: 03/19/93
Customer:
Engineer:bagwell
Quant Part Number Description
1 45C70 Coax BNC Tee Connector
45C71 Coax BNC 75 Ohm Terminating Load
45C72 Coax BNC Male Connector
2 57C380 Communications Passive Tap
2 57C381 Cable - Comm. module to passive tap
57C395 AutoMax Programming Executive
57C493
61C126 ReSource Portable Computer
System: 135792 Page: 3
Date: 03/19/93
Customer:
Engineer:bagwell
Rack Slot Description
A00 1 Generic card with 32,768 registers
A00 7 Generic card with 32 registers
Use the following procedure to generate a bill of material for an AutoMax system.
The Microsoft Windows User's Guide provides information about using the
Program Manager and the File Manager.
Step 1. From your current AutoMax application, access the Control menu
(ALT,SPACEBAR or click on the Control menu).
Step 2. Use Switch To to access the Program Manager.
Step 3. Access the Resource Group and select GEN B/M. The AutoMax Bill of
Material dialog box will be displayed.
Step 4. Enter any information needed for the following fields. Use TAB or SHIFT
+ TAB to move to the next field. The entries for drives and library
directory must match your Executive software configuration as entered
in Setup.
System Name: Enter the name of the system.
Library drive: If different than the default, enter your library drive.
Library directory: If different than the default, enter your library directory.