Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 265)

LĆ3 AutoMax Bill of Material Generator
Drive for temporary files: If different than the default, enter the drive used
for temporary workspace.
Step 5. After entering the last field, press TAB or ENTER to begin generating the
bill of material file. When the file is complete, the Resource Group of the
Program Manager will be displayed.
The bill of material file is contained in the system directory
(<d>:\<library>\<system>) and is named <system>.BM.
Step 6. To print the bill of material for a system, access the Main Group and
select the File Manager.
Step 7. Access the system directory that contains the desired <system>.BM
file.
Step 8. Choose <system>.BM from the list of files, then select Print from the
File menu.
Step 9. When the billĆofĆmaterial file has finished printing, use the Control menu
to close the File Manager. Then minimize the Program Manager to return
to your application.
Note: The library directory contains the source file (GENBM.PRG) for the
AutoMax Bill of Material Generator. This file is intended to be a readĆonly
file. You can access it by using your text editor.