Rockwell Automation 57C650 AutoMax Programming Executive Version 3.8 - Manual (Page 60)

5Ć4 AutoMax Programming Executive Version 3.x
5.1.6 Printing System Files
The Print System command enables you to print out files relevant to
one or more systems. After selecting one or more systems from the
System list, select Print from the System menu. A dialog box with the
various print options will be displayed (see the figure below). Note
that cross reference" is abbreviated xrf" in some dialog boxes.
Figure 5.3 Ć System Print Dialog Box
There are several print options at the system level. Options are
enabled (or disabled) depending on which check boxes are selected
(checked). The dialog box will initially display System Print as
selected (checked). The Use Existing Cross Reference Files and Log
Errors options will be enabled, but not selected. The other options
will be disabled.
Selecting System Print will print out the following for each of the
selected systems:
D System title page (system name, description, engineer, customer,
and a list of the sections in the system.
D System documentation file
D Network cross reference file
D Section title page (section name, description, engineer, and a
list of racks in the section).
D Section documentation file
D Rack title page (rack name, description, engineer, location,
and a list of the tasks in the rack).
D Rack documentation file
D Rack cross reference file