Rockwell Automation GV3000/SE V.6 Regulator Board 0-56921-6xx, 413338-6BU, 0-56940-6xx, 814.61.00 User Manual
Page 49
Advertising
7-2
GV3000/SE Drive Version 6 Regulator Board Installation Instructions
Step 1.
Shut Down the Drive
Step 1.1. Disconnect, lock out, and tag all incoming power to the drive.
Step 1.2. Wait five minutes for the DC bus capacitors to discharge.
Step 1.3. Remove the cover by loosening the six cover screws.
Important: Read and understand the warning labels on the inside of the drive before
proceeding.
Figure 7.1 – Regulator Board Location in 25 to 50 HP @ 460 VAC Drives
Keypad
Regulator
Board
Power Module
Interface Board
Advertising