Rockwell Automation GV3000/SE V.6 Regulator Board 0-56921-6xx, 413338-6BU, 0-56940-6xx, 814.61.00 - Manual (Page 5)

Contents III
List of Figures
Figure 2.1 – DC Bus Voltage Terminals (1 to 5 HP @ 460 VAC Drives).................. 2-2
Figure 2.2 – Regulator Board Location in 1 to 5 HP @ 460 VAC Drives.................. 2-3
Figure 2.3 – Disconnecting the Keypad Ribbon Cable from the Regulator Board.... 2-4
Figure 2.4 – Location of Jumpers J4 and J17 on the Regulator Board .................... 2-5
Figure 3.1 – DC Bus Voltage Terminals (7.5 to 10 HP @ 460 VAC Drives) ............ 3-2
Figure 3.2 – Disconnecting the Keypad Ribbon Cable from the Regulator Board.... 3-3
Figure 3.3 – Location of Jumpers J4 and J17 on the Regulator Board .................... 3-4
Figure 3.4 – Regulator Board Location in 7.5 to 10 HP @ 460 VAC Drives............. 3-5
Figure 4.1 – DC Bus Voltage Terminals (1 to 20 HP @ 230 VAC Drives) ............... 4-2
Figure 4.2 – Disconnecting the Keypad Ribbon Cable from the Regulator Board.... 4-3
Figure 4.3 – 1 to 20 HP @ 230 VAC GV3000/SE Drive........................................... 4-4
Figure 4.4 – Location of Jumpers J4 and J17 on the Regulator Board .................... 4-5
Figure 5.1 – DC Bus Voltage Terminals (30 to 100 HP @ 230 VAC and 75 to
200 HP @ 460 VAC Drives) ................................................................. 5-2
Figure 5.2 – Location of Terminal Cover and Regulator Board Cover in 30 to
100 HP @ 230 VAC and 75 to 200 HP @ 460 VAC Drives ................. 5-3
Figure 5.3 – Regulator Board’s Connection to Option Board, Keypad,
and Base Board.................................................................................... 5-4
Figure 5.4 – Location of Jumpers J4 and J17 on the Regulator Board .................... 5-5
Figure 6.1 – Regulator Board Location in 15 to 25 HP @ 460 VAC Drives .............. 6-2
Figure 6.2 – Regulator Board Location in 25 to 60 HP @ 460 VAC Drives.............. 6-3
Figure 6.3 – DC Bus Voltage Terminals (15 to 25 HP @ 460 VAC Drives) ............. 6-3
Figure 6.4 – DC Bus Voltage Terminals (25 to 60 HP @ 460 VAC Drives).............. 6-4
Figure 6.5 – Disconnecting the Keypad Ribbon Cable from the Regulator Board.... 6-5
Figure 6.6 – Location of Jumpers J4 and J17 on the Regulator Board .................... 6-6
Figure 7.1 – Regulator Board Location in 25 to 50 HP @ 460 VAC Drives.............. 7-2
Figure 7.2 – DC Bus Voltage Terminals (25 to 50 HP @ 460 VAC Drives) ............. 7-3
Figure 7.3 – Disconnecting the Keypad Ribbon Cable from the Regulator board .... 7-4
Figure 7.4 – Location of Jumpers J4 and J17 on the Regulator Board .................... 7-5
Figure 8.1 – Regulator Board Location in 60 to 100 HP @ 460 VAC Drives ............ 8-2
Figure 8.2 – Regulator Board Location in 100 to 150 HP @ 460 VAC Drives .......... 8-3
Figure 8.3 – DC Bus Voltage Terminals (60 to 100 HP @ 460 VAC Drives) ........... 8-4
Figure 8.4 – DC Bus Voltage Terminals (100 to 150 HP @ 460 VAC Drives).......... 8-5
Figure 8.5 – Disconnecting the Keypad Ribbon Cable from the Regulator Board.... 8-6
Figure 8.6 – Location of Jumpers J4 and J17 on the Regulator Board .................... 8-7
Figure 9.1 – Regulator Board Location in 200 to 400 HP Dives ............................... 9-2
Figure 10.1 – 2 to 15 Amp GV3000/SE Bookshelf Drive ........................................ 10-3
Figure 10.2 – 24 to 30 Amp GV3000/SE Bookshelf Drive ...................................... 10-4
Figure 10.3 – 24 to 30 Amp GV3000/SE Bookshelf Drive
(Cover and Front Panel Removed)..................................................... 10-5
Figure 10.4 – Location of Jumpers J4 and J17 on the GV3000/SE
Bookshelf Regulator Board ................................................................ 10-6