Rockwell Automation GV3000/SE V.6 Regulator Board 0-56921-6xx, 413338-6BU, 0-56940-6xx, 814.61.00 - Manual (Page 84)

Troubleshooting the Installation 13-1
C
HAPTER
13
Troubleshooting the Installation
Table 13.1 describes possible installation problems and actions required to correct
them. The drive hardware reference manual also contains guidelines for
troubleshooting the drive.
Table 13.1 – Possible Problems and Corrective Actions
Description of Problem Corrective Action
Replacement board is too big or
too small. Check the part number on the replacement
board. Use table 1.1, 1.2, or 1.3 in chapter 1 of
this manual to verify that you have the
appropriate board for your installation.
Fault or alarm code other than
CHS or PUn appears on the
display. Refer to the software reference manual for
code descriptions and the corresponding
corrective action. See table 1.1, 1.2, or 1.3 in
chapter 1 for the manual that corresponds to
your drive.