Rockwell Automation GV3000/SE V.6 Regulator Board 0-56921-6xx, 413338-6BU, 0-56940-6xx, 814.61.00 - Manual (Page 72)

Installing Regulator Board P/N 814.61.00 in 2 to 15 Amp and 24 to 30 Amp GV3000/SE Bookshelf Drives 10-7
Step 7. Reattach the Cover
Step 7.1. Reconnect the keypad/display cable to the cover.
Important: For 24 to 30 amp drives, fold and slide the keypad/display cable under the
heatsink at the top of the drive before attaching the cover.
Step 7.2. Reattach the cover using the single faceplate screw.
Step 8. Reconnect the Cable Leads and Apply Power
Step 8.1. Reconnect all cable leads to the appropriate terminals on the face of the
drive.
Step 8.2. Remove the lockout and tag. Apply power to the drive. SELF is displayed
while the drive performs power-up diagnostics. When diagnostics are
complete, the fault code CHS will be displayed.
This completes the hardware installation of the Regulator board replacement
procedure. Go to chapter 11 for the procedure to clear the CHS fault code.