Rockwell Automation SA3100 Diag,Troublesht,Startup,Guide - Manual (Page 9)

Introduction 1-1
C
HAPTER
1
Introduction
This instruction manual is divided into two sections: 1) a description of SA3100 drive
diagnostics and troubleshooting, 2) start-up guidelines. This manual is intended for
users of SA3100 drives who have training and experience in AC drive control and who
are familiar with all other SA3100 drive documentation.
The diagnostics and troubleshooting chapters (chapters 2-3) describe the error
checking built into the PMI Regulator operating system and how to use warning and
fault registers, LEDs, and the error log to diagnose drive problems.
Chapter 4 provides guidelines on starting up SA3100 AC drives. Although initial start-
up services are usually provided by Rockwell personnel, it is recommended that the
user become familiar with the general guidelines in this chapter in order to be better
prepared to work with the Rockwell service engineer.
1.1 Related Publications
The user must become familiar with the other instruction manuals that describe the
SA3100 drive system. The documentation that describes the SA3100 drive is
contained in binder S-3053 and is listed in table 1.1.
Table 1.1 – SA3100 Documentation (Binder S-3053)
Document Document Part Number
Drive System Overview S-3005
Universal Drive Controller Module S-3007
Fiber Optic Cabling S-3009
SA3100 Drive Configuration & Programming S-3056
SA3100 PMI Regulator S-3057
SA3100 Power Modules S-3058
SA3100 Diagnostics, Troubleshooting, & Start-Up
Guidelines S-3059
Information Guide S-3054