SARGENT Passport 1000 PG Exit Devices - Manual (Page 22)

22 A7809B
Copyright © 2012, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
10/31/12
Passport 1000 PG Exit Device
4. The Pocket PC will enable Bluetooth and
begin discovery. If you receive a warning,
"No Devices Found," then check again to see
the blue light flashing on the contact card and
tap ‘Retry’ .
If the blue light is not flashing, remove the
contact card, wait for the lights to go dark,
then reinsert it before tapping ‘Retry’.
If this step fails repeatedly, then contact
PERSONA technical support at (800)–481–8464.
1. Enter "1234" when prompted for ‘Passcode’.
2. Tap the ‘COM Ports’ tab at the bottom of the screen.
Note the COM port number assigned to the
Firefly device.
NOTE: If you do not see the FireFly-EAE0 device in the
COM port list, tap "New Outgoing Port" and pick
the FireFly-EAE0 device before tapping "Next."
3. Choose an available COM port number (COM8 is often a
good choice) and tap "Finish."
Once you can see the " " list entry,
highlight it and tap ‘Next’.
Configuring the Locklink Software