SARGENT Passport 1000 PG Exit Devices - Manual (Page 23)

10/31/12
A7809B 23
Copyright © 2012, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Passport 1000 PG Exit Device
Note: Be sure to perform an Operational Check (see Section 9) for each lock.
3. Log into the LockLink™ by tapping the arrow and selecting your
username from the drop down list:
1. Tap then tap
to launch the LockLink program.
Choose Menu and then ‘Setup’.
2. Pick the COM port noted in Step 6.
Check the box ‘Use Bluetooth’ and click ‘Apply’.
4. Type in your password.
You can use the onscreen keyboard entry method to enter information.
Once you have entered your password, you will begin on the Upload
screen. This is the proper place to be for programming locks.
5. To access the full screen keyboard (shown at right) tap on the ellipsis
(three dots) next to the password field.
Start the PERSONA LockLink™ software:
1. Tap the Start button on the Pocket PC Screen.
2. If visible, select PERSONA LockLink™ to launch the program;
otherwise, tap Start and Programs to launch the Programs list
and then select the PERSONA LockLink™ icon (right).
Lockset Programming 9