SARGENT Passport 1000 PG Exit Devices - Manual (Page 9)

Fig. 2D
(4) #10 wood
screws or #10-24
machine screws
(2) #12-24 x 1-7/8”
flat head connecting
screws to cylinder
#34 CYLINDER
Outside of door
Rim Installation Instructions (Continued)
2 – Installation of Exit Trim (ET), Exit Chassis and Cylinder
(continued)
C. Cylinder Installation
Note: For devices without cylinder, go to Step 2D.
1. Insert cylinder into “ET” control.
2. Mate cylinder tailpiece into hub of exit device chassis.
3. Make sure “ET” harness is clear of cylinder and cylinder tailpiece.
D. Securing Cylinder
1. Secure cylinder to exit chassis using (2)
#12-24 x 1-7/8” connecting screws.
2. Fasten exit chassis to door using (4) #10
wood screws (for wood door) or #10-24
machine screws (for metal door).
Inside of door
Fig. 2C
9 A7809B
Copyright © 2012, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
10/31/12
Passport 1000 PG Exit Device