SARGENT Passport 1000 PG Exit Devices - Manual (Page 3)

2
3
4
General Description
Items Supplied with Exit Device
Items included in your 8877 and 8977 Series
Exit Device carton:
• Outside Escutcheon with Keypad
• Outside Motorized Trim Assembly
• Exit Device
• Mortise cylinder for 8977
• Rim cylinder for 8877
• Inside Escutcheon with Circuit Board and Battery Pack
• 6 “AA” alkaline batteries
• Screw Pack
Hardware Specifications
Passport 1000 PG Rim Exit
• Latch – 3/4” throw, stainless steel
• Outside motor driven “ET” lever controlled by keypad
• Push bar retracts latch from inside
• Fire stop provided on all lever handle designs
• SARGENT exit devices furnished for 1-3/4” doors
• UL Listed
• Accepts all SARGENT rim cylinders (8877 only)
• Key retracts latch (8877 only)
• Available in “ET” lever handle designs only
Electronic Specifications
PERSONA Campus™ Online Software Features
• Use existing magstripe ID cards (high or low
coercivity)
• New keycards can invalidate and reactivate key cards/
users – encoded quickly and easily through the
“Conference Guest Wizard”
• Assign pre-defined access patterns and access points as
well as keycard start and end times (group or individually)
• Importing student/personnel information is easy using
the Import module
Passport 1000 PG Mortise Exit
• Latch – 3/4” throw, anti-friction, brass
• Outside motor driven “ET” lever controlled by keypad
• Push bar retracts latch from inside
• Fire stop provided on all lever handle designs
• SARGENT exit devices furnished for 1-3/4” doors
• UL Listed
• Accepts all SARGENT mortise cylinders (8977 only)
• Key retracts latch (8977 only)
• Available in “ET” lever handle designs only
• Provide Deadbolt override at user-specified doors for
groups or individuals
• Connect to an external database for seamless
integration of common information
• Remote technical support is available
• PERSONA Campus Online Software runs as a
standalone system on a single PC or networked using
existing TCP/IP networks
Items included in your 8878 and 8978 Series
Exit Device carton:
• Outside Escutcheon with Keypad
• Outside Motorized Trim Assembly
• Exit Device
• Inside Escutcheon with Circuit Board and Battery Pack
• 6 “AA” alkaline batteries
• Screw Pack
• Over 1 million users per door; 700 event transaction
audit trail
• Multiple time zone and holiday access scheduling
• First-In unlock configuration, either by time or by valid
time or by user (selectable)
• Input Power: DC 9V, 1.5A through 6 AA Alkaline
Batteries or Electrical Power
• Card Coercivity: HiCo (4000 Oersted) or
LoCo (300 Oersted)
Designed specifically for the campus market, the SARGENT Passport 1000 PG Rim/Mortise Exit Device
(powered by PERSONA) provides offline card/PIN access control, as well as detailed audit capabilities.
• The PG stand alone unit is available with both keypad and magstripe card technology, or
magstripe only.
• The PG operates on six (6) “AA” alkaline batteries and may be used for both indoor and
outdoor applications.
Note: A weather-protective gasket is recommended for outdoor applications.
3 A7809B
Copyright © 2012, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
10/31/12
Passport 1000 PG Exit Device