ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 186)

Configuration and Activation 6-7
Properties dialog for a new FlowHawk location
6. Select the method by which you will communicate with the
monitor from the Connect Using drop-down list.
 TCP/IP Choose this option for wireless, remote
communication. Selecting this option also requires
entering the monitor’s IP address for the wireless
connection in the IP Address field.
Note: Do not use leading zeros before or within the IP
address. For example, an IP address of 166.213.006.020
contains leading zeros and, therefore, should be entered in
the following way: 166.213.6.20.
 Modem This option corresponds to CSD (Circuit
Switched Data) communication. CSD signals are more
susceptible to noise interference (which can hinder data