ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 215)

6-36 IETG FlowHawk Manual
 Store Data Select this checkbox to ensure the monitor logs
the smart depth data to memory. This option is selected by
default.
 Advanced Select this button to access the Advanced
Parameters dialog.
Advanced Parameters dialog
Note: Modifications made to the Advanced Parameters
should be performed only by or under the guidance of
trained IETG personnel. Therefore, IETG recommends
leaving the default settings (Auto) in place.
Modify the parameters as necessary, and then select OK once
complete.
 DAC Gain Choose the method for managing the
amplification of the analog signal that returns to the sensor:
− Auto Select this option to allow the monitor to
automatically optimize the amplification of the signal.
− Manual Select this option to enter a fixed value
between -12db (lower amplification) and +12db (high
amplification) at which to amplify the signal.