ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 291)

Maintenance and Troubleshooting 8-7
Codes active after removing magnetic from contact with GSM Module
Upon activation, interpret the diagnostic codes in succession in the
following way:
Note: The LED window displays only one number/
character at a time.
 Ads indicates code initiation
 cccc is followed by the wireless provider’s number
 bbbb is followed by the battery voltage to two decimal places
 rrrr is followed by the wireless communication raw signal
strength, then db, followed by the signal strength in decibels
(ranging from -51 to -112 dBs; 99 indicates that no signal is
available)
 nnnn is followed by the monitor’s network IP address
 PPPP is followed by the package type (a package type of at
least 48 will support data delivery (i.e., push data))