ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 225)

6-46 IETG FlowHawk Manual
Note: The Cross Check Gain parameter does not apply
to the Peak (Surcharge) Velocity Sensor; therefore, it is not
available on the Peak Velocity tab.
 Store Data Select this checkbox to ensure the monitor logs
the velocity data to memory. This option is selected by default.
 Advanced Select this button to access the Advanced
Parameters dialog.
Advanced Parameters dialog
Modify the parameters as necessary, and then select OK once
complete.
 DAC Gain Choose the method for managing the
amplification of the analog signal that returns to the sensor:
− Auto Select this option to allow the monitor to
automatically optimize the amplification of the signal.
− Manual Select this option to enter a fixed value
between -12db (lower amplification) and +12db (high
amplification) at which to amplify the signal.