ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 96)

Sensor Installation and Connection 3-37
2 Extension cables can be ordered to specific lengths up to 91 meters. Note the
desired length (meters converted to feet) in the -xxx-- portion of the part number.
Standard lengths are 3.0m (10 ft.), 7.6m (25 ft.), 15.2m (50 ft.), 22.8m (75 ft.),
30.5m (100 ft.), 38.1m (125 ft.), 45.7m (150 ft.), and 61.0m (200 ft.). All other
lengths must be custom ordered.
3 Communication cables can be ordered in 3-, 26-, 30-, or 41-meter (10-, 85-, 100-,
or 135-ft.) lengths. Other cable lengths up to 91 meters (300 ft.) are also available
by request. Indicate the desired length in feet in the -xx- portion of the part number.
Gathering the Tools and Equipment
Gather the following tools for the installation:
 Battery-powered hammer drill with assorted bits – including
the following at a minimum:
 6-mm x 150-mm masonry bit
 10-mm x 100-mm (minimum length) masonry bit
 8-mm and 10-mm carbide-tipped bits
 1- to 2-kg hammer
 Rubber mallet
 500- to 1000-mm carpenter’s level
 Metric nut driver or socket set
 Metric wrenches
 Screwdrivers (flathead and Phillips head of assorted sizes)
 Threads tap compatible with the thread spec on the monitor
mounting stud
 Diagonal wire cutters
 Folding carpenter’s rule with a brass slide
 Mastic tape (p/n 507193) or rubber coaxial stretch tape