ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 65)

3-6 IETG FlowHawk Manual
 Pipe Shape Taking the appropriate measurements that
precisely reflect the exact pipe shape is essential to obtaining
accurate flow calculations. Therefore, irregularly-shaped pipes
will require additional measurements. Refer to the Profile
User’s Guide #950015 (version B4 or greater) for more
information.
Note: All relevant pipe dimensions and measurements
are required for entry in the Profile software during
monitor configuration and activation. Qstart also requires
pipe shape, height, and width during these activities.
 Manhole Depth Measure the distance from the rim to the
manhole invert. Distances beyond 9 meters could require
extension cables for the sensors. See Appendix B.