ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 226)

Configuration and Activation 6-47
 Ping Amplitude Choose the method for managing the
amplification of the analog signal that is sent out, or
transmitted from, the sensor. Smaller pipes typically
require weaker (quieter) amplification; larger pipes
typically require stronger (louder) amplification.
− Auto Select this option to allow the monitor to
automatically optimize the amplification of the signal.
− Manual Select this option to enter the percentage of
full amplification at which to transmit the signal.
Enter a percentage between 10 and 100 percent, where
100 percent represents maximum amplification.
Pressure tab
The pressure sensor measures the height of the water above the
sensor (mounted at the crown of the pipe) under surcharge
conditions where the flow has completely filled the pipe and is
rising in the manhole.
Edit the following parameters corresponding to the pressure depth
sensor in the Surface Combo Sensor or the Ultrasonic Depth Sensor
with the pressure option: