Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 21)

17
4.2.7 Printer
The Model 680 Microplate Reader has a built-in printer interface connector (25 pin D-sub) or
an optional factory built-in printer.
The printer interface connector allows the user to connect an external printer for the printout
of reports or protocol. This external printer interface is based upon Centronics interface
standards.
Two types of printer, ASCII type and ESC/P type, are allowable to connect. The ASCII type
printer can only accept ASCII character based codes which does not include any graphic
codes. Next, the ESC/P type printer can accept ESC/P codes which include graphic codes.
The optional factory built-in internal printer and the external ESC/P type printer can generate
all types of report including graphs and kinetic plots.