Dell PowerVault DR6000 - Manual (Page 11)

Drive-Status
Indicator Pattern
(RAID Only) Condition
NOTE: The drive status indicator remains off until all hard drives are initialized
after the system is turned on. Drives are not ready for insertion or removal
during this time.
Blinks green,
amber, and off Predicted drive failure
Blinks amber four
times per second Drive failed
Blinks green slowly Drive rebuilding
Steady green Drive online
Blinks green three
seconds, amber
three seconds, and
off six seconds Rebuild aborted
Back-Panel Features And Indicators
The following topic describes the back-panel features and indicators of the Dell DR6000 system.
Figure 3. Back-Panel Features And Indicators
Item Indicator, Button, or
Connector
Icon Description
1 System identification
button The identification buttons on the front and back
panels can be used to locate a particular system
within a rack.
• When one of these buttons is pressed, the
system status indicator on the back flashes until
one of the buttons is pressed again.
• Press to toggle the system ID on and off.
• If the system stops responding during POST,
press and hold the system ID button for more
than five seconds to enter BIOS progress mode.
11