Troubleshooting your system, Safety first—for you and your system, Troubleshooting system startup failure – Dell PowerVault DR6000 User Manual

Page 85: Troubleshooting external connections, Troubleshooting the video subsystem, Troubleshooting a usb device, 4 troubleshooting your system

Advertising
background image

4

Troubleshooting Your System

Safety First—For You And Your System

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.

Troubleshooting System Startup Failure

If you boot the system to the BIOS boot mode after installing an operating system from the UEFI Boot
Manager, the system hangs. The reverse is also true. You must boot to the same boot mode in which you
installed the operating system.
For all other startup issues, note the system messages that appear on the screen.

Troubleshooting External Connections

Ensure that all external cables are securely attached to the external connectors on your system before
troubleshooting any external devices.

Troubleshooting The Video Subsystem

1.

Check the system and power connections to the monitor.

2. Check the video interface cabling from the system to the monitor.

3. Run the appropriate diagnostic test.

If the tests run successfully, the problem is not related to video hardware.
If the tests fail, see

Getting Help

.

Troubleshooting A USB Device

Use the following steps to troubleshoot a USB keyboard/mouse. For other USB devices, go to step 7.

1.

Disconnect the keyboard and mouse cables from the system briefly and reconnect them.

2. Connect the keyboard/mouse to the USB port(s) on the opposite side of the system.

3. If the problem is resolved, restart the system, enter the System Setup, and check if the non-

functioning USB ports are enabled.

4. Replace the keyboard/mouse with another working keyboard/mouse.

5. If the problem is resolved, replace the faulty keyboard/mouse.

85

Advertising