Dell PowerVault DR6000 - Manual (Page 28)

NOTE: Certain platform configurations may not support the full set of features provided by the
Lifecycle Controller.
For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and
deploying the operating system, see the Lifecycle Controller documentation at dell.com/support/
manuals.
iDRAC Settings Utility
The iDRAC Settings utility is an interface to set up and configure the iDRAC parameters using UEFI. You
can enable or disable various iDRAC parameters using the iDRAC Settings utility.
NOTE: Accessing some of the features on the iDRAC Settings utility requires the iDRAC7 Enterprise
License upgrade.
For more information on using iDRAC, see the iDRAC7 User's Guide under Software → Systems
Management → Dell Remote Access Controllers, at dell.com/support/manuals.
Entering The iDRAC Settings Utility
1. Turn on or reboot the managed system.
2. Press <F2> during Power-on Self-Test (POST).
3. In the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.
28