Dell PowerVault DR6000 - Manual (Page 47)

4. Lift the cooling-fan assembly out of the chassis.
Figure 19. Removing and Installing the Cooling-Fan Assembly
1. cooling-fan assembly 2. cooling fans (6)
3. blue release levers (2) 4. guide pins (2)
5. cooling-fan connectors (6)
Installing The Cooling-Fan Assembly
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Ensure that the cables are correctly installed and retained by the cable retention
bracket before installing the cooling-fan assembly. Incorrectly installed cables may get damaged.
1. Align the cooling-fan assembly slots with the guide pins on the chassis.
2. Slide the cooling-fan assembly into the chassis.
3. Lock the cooling-fan assembly into the chassis by rotating the blue release levers downward until
firmly seated.
4. Close the system.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
47