Dell PowerVault DR6000 - Manual (Page 60)

Figure 30. Removing and Installing the Expansion Card Riser 3
1. riser guide (front) 2. expansion-card riser 3
3. expansion-card riser 3 connector 4. riser guide (back)
Figure 31. Identifying Connectors on the Expansion Card Riser 3
1. expansion-card slot 6 2. expansion-card slot 7
4. If applicable, remove or install an expansion card on the riser.
5. Replace the expansion-card riser.
6. Close the system.
7. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
60