Dell PowerVault DR6000 User Manual
Page 82
Advertising
5. Disconnect the mini SAS cable from the system board:
a) Push the mini SAS cable connector to slide it further into the connector (J_SASX8) on the system
board.
b) Press down and hold the metal tab on the mini SAS cable connector.
c) Pull the mini SAS cable out of the connector on the system board.
a.
mini SAS cable connector
b. metal tab
c.
connector on the system board
6. Disconnect all cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the
system board from the chassis.
CAUTION: Do not lift the system board assembly by grasping a memory module, processor,
or other components.
82
Advertising