Replacing an expansion-card riser, D riser from the chassis. see figure 3-13 – Dell PowerEdge R410 User Manual
Page 103
Advertising
Installing System Components
103
Figure 3-13.
Installing or Removing an Expansion-Card Riser
Replacing an Expansion-Card Riser
1 To install an expansion-card riser, align the riser guide posts with the riser
guide posts on the system board. See Figure 3-13.
2 Lower the expansion-card riser into place until the expansion-card riser
connector is fully seated.
1
riser guides (2)
2
expansion-card riser
3
expansion card slot
4
riser guide posts (2)
5
expansion-card riser socket (2)
6
integrated storage controller slot
5
1
2
3
4
6
book.book Page 103 Tuesday, March 31, 2009 5:26 PM
Advertising