Embedded system management – Dell PowerEdge R410 User Manual
Page 75
Using the System Setup Program and UEFI Boot Manager
75
Deleting or Changing an Existing Setup Password
1 Enter the System Setup program and select the System Security.
2 Highlight Setup Password, press <Enter> to access the setup password
window. Press <Enter> twice to clear the existing setup password.
The setting changes to Not Enabled.
3 If you want to assign a new setup password, perform the steps in "Assigning
Embedded System Management
The Unified Server Configurator (USC) is an embedded utility that enables
systems and storage management tasks from an embedded environment
throughout the server’s lifecycle.
The USC can be started during the boot sequence and can function
independently of the operating system.
NOTE:
Certain platform configurations may not support the full set of features
provided by USC.
The following features of USC are supported on systems with Baseboard
Management Controller (BMC):
•
Installing an operating system
•
Running diagnostics to validate the memory, I/O devices, processors,
physical disks, and other peripherals
When an optional iDRAC6 Express card is installed, USC provides the
following additional features:
•
Downloading and applying firmware updates
•
Configuring hardware and firmware
For more information about setting up USC, configuring hardware and
firmware, and deploying the operating system, see the Dell Unified Server
Configurator User’s Guide on the Dell Support website at
support.dell.com/manuals.
book.book Page 75 Tuesday, March 31, 2009 5:26 PM