Installing the system board shroud – Dell PowerEdge R410 User Manual
Page 106
Advertising
106
Installing System Components
3 Grasping the tabs, gently lift the shroud straight up and away from the
system board. See Figure 3-15.
4 Remove the system board shroud.
Figure 3-15.
Installing and Removing the System Board Shroud
Installing the System Board Shroud
1 Align the shroud using center of the numbered fan bays as a guide and
locate the tab projection on the left side of the fan module numbered 3.
See Figure 3-15.
2 Push the system board shroud down until all edges are seated in the slots,
securing the shroud to the system board.
3 Close the system. See "Opening and Closing the System" on page 82.
1
power distribution board shroud
2
system board shroud
3
tabs (2)
1
3
2
book.book Page 106 Tuesday, March 31, 2009 5:26 PM
Advertising