Dell PowerEdge R410 - Manual (Page 144)

144
Installing System Components
10 If applicable, reconnect the RAID battery cable to the PERC controller card.
11 If applicable, reinstall the iDRAC6 Enterprise card. See "Installing an
iDRAC6 Enterprise Card" on page 109.
12 If applicable, reinstall the iDRAC6 Express card. See "Installing an
iDRAC6 Express Card" on page 107.
13 Replace the system board shroud. See "Installing the System Board
Shroud" on page 106.
14 Close the system. See "Closing the System" on page 83.
15 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
16 If applicable, replace the Bezel. See "Removing and Replacing the
Optional Front Bezel" on page 81.
book.book Page 144 Tuesday, March 31, 2009 5:26 PM