Dell PowerEdge R410 - Manual (Page 19)

About Your System
19
Guidelines for Connecting Optional External
Devices
• Turn off power to the system and external devices before attaching a new
external device. Turn on any external devices before turning on the system
(unless the documentation for the device specifies otherwise).
• Ensure that the appropriate driver for the attached device has been
installed on the system.
• If necessary to enable ports on your system, use the System Setup program.
See "Using the System Setup Program and UEFI Boot Manager" on
page 57.
NIC Indicator Codes
Figure 1-5. NIC Indicators
1 link indicator 2 activity indicator
Indicator Indicator Code
Link and activity
indicators are off The NIC is not connected to the network.
Link indicator is green The NIC is connected to a valid link partner on the
network.
Link indicator is amber The NIC is connected to a valid network link at 10/100
Mbps.
Activity indicator is
amber blinking Network data is being sent or received.
1 2
book.book Page 19 Tuesday, March 31, 2009 5:26 PM