Dell PowerEdge R410 - Manual (Page 105)

Installing System Components
105
Figure 3-14. Removing or Installing a USB Memory Key
System Board Shroud
The system board shroud covers the processor, heat sink, memory modules,
and system battery and provides air flow to these components. Airflow is
facilitated by the cooling fan modules, which are positions directly behind the
system board shroud.
Removing the System Board Shroud
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Open the system. See "Opening and Closing the System" on page 82.
2 Locate the two shroud tabs with blue dots between the fan assemblies. See
Figure 3-15.
1 USB memory key 2 USB memory key connector
1
2
book.book Page 105 Tuesday, March 31, 2009 5:26 PM