Installing the raid battery – Dell PowerEdge R410 User Manual

Page 118

Advertising
background image

118

Installing System Components

3 To disconnect the RAID battery cable from the connector on the system

board, press the tab on the RAID battery cable connector, and gently
pull the cable connector out of the connector on the system board.
See Figure 3-20.

4 Pull back gently on the two tabs holding the RAID battery and lift the

RAID battery from the battery carrier. See Figure 3-20.

Figure 3-20.

Removing and Installing the RAID Battery

Installing the RAID Battery

1 Insert the RAID battery into the battery carrier until it locks into place.

See Figure 3-20.

2 Connect the battery cable to the connector on the system board. See

Figure 7-1.

3 Close the system. See "Closing the System" on page 83.

1

RAID battery

2

battery cable connector

3

battery carrier tabs (2)

4

battery carrier

3

2

4

1

book.book Page 118 Tuesday, March 31, 2009 5:26 PM

Advertising