Dell PowerEdge R410 User Manual
Page 113
Advertising
Installing System Components
113
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 82.
3 Remove the system board shroud. See "Removing the System Board
4 Disconnect the fan’s power cable from the system board. See Figure 3-18.
5 Remove the faulty fan by grasping the fan and sliding the fan from the fan
assembly. See Figure 3-18.
Figure 3-18.
Removing and Replacing a Fan
1
fan
2
power cable
1
2
book.book Page 113 Tuesday, March 31, 2009 5:26 PM
Advertising