Removing a hard drive from a hard-drive bracket, Installing a hard drive into a hard-drive bracket, Bracket (see figure 3-8) and insert the – Dell PowerEdge R410 User Manual

Page 91: See "installing a hard drive into a

Advertising
background image

Installing System Components

91

Removing a Hard Drive From a Hard-Drive Bracket

Remove the screws from the slide rails on the hard-drive bracket and separate
the hard drive from the bracket. See Figure 3-8.

Figure 3-8.

Removing a Hard Drive From a Hard-Drive Bracket

*Screws are supplied along with the hard drives ordered from Dell.

Installing a Hard Drive Into a Hard-Drive Bracket

1 Insert the hard drive into the hard-drive bracket with the connector end of

the drive at the back. See Figure 3-8.

2 Align the holes on the hard drive with the back set of holes on the

hard-drive bracket.

When aligned correctly, the back of the hard drive will be flush with the
back of the hard-drive bracket.

3 Attach the four screws to secure the hard drive to the hard-drive bracket.

1

screws (4)*

2

hard drive

3

SAS/SATA screw hole

4

hard-drive bracket

1

2

3

4

book.book Page 91 Tuesday, March 31, 2009 5:26 PM

Advertising