Kontron AT8402 CLI - Manual (Page 120)

Quality of Service (QoS) Commands AT8402
AT8402 CLI Reference Manual Page 3 - 8
match criteria are also known as class rules, with a class definition consisting of one or
more rules to identify the traffic that belongs to the class.
NOTE: Once you create a class match criterion for a class, you cannot change
or delete the criterion. To change or delete a class match criterion, you
must delete and re-create the entire class.
The CLI command root is
class-map
.
3.3.1 class-map
This command defines a DiffServ class of type match-all. When used without any
match condition, this command enters the class-map mode. The
<class-map-name>
is
a case sensitive alphanumeric string from 1 to 31 characters uniquely identifying an
existing DiffServ class.
NOTE: The class-map-name 'default' is reserved and must not be used.
The class type of
match-all
indicates all of the individual match conditions must be
true for a packet to be considered a member of the class.
NOTE: The CLI mode is changed to Class-Map Config when this command is
successfully executed.
Format class-map match-all <class-map-name>
Mode Global Config
3.3.1.1 no class-map
This command eliminates an existing DiffServ class. The
<class-map-name>
is the
name of an existing DiffServ class ( The class name 'default' is reserved and is not
allowed here). This command may be issued at any time; if the class is currently
referenced by one or more policies or by any other class, the delete action fails.
Format
no class-map <class-map-name>
Mode Global Config
3.3.2 class-map rename
This command changes the name of a DiffServ class. The <class-map-name> is the
name of an existing DiffServ class. The
<new-class-map-name>
parameter is a case-
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class
(The <class-map-name> ‘default’ is reserved and must not be used here).
Default none
Format
class-map rename
<class-map-name> <new-class-map-name>
Mode Global Config
3.3.3 match any
This command adds to the specified class definition a match condition whereby all
packets are considered to belong to the class.
Default
none
Format
match any