11 dot1x re-authentication, 12 dot1x system-auth-control, 13 dot1x timeout – Kontron AT8402 CLI User Manual

Page 73: At8402 switching commands

Advertising
background image

AT8402

Switching Commands

Page 2 - 41

AT8402 CLI Reference Manual

2.10.11

dot1x re-authentication

This command enables re-authentication of the supplicant for the specified port.

Default

disabled

Format

dot1x re-authentication

Mode

Interface Config

2.10.11.1

no dot1x re-authentication

This command disables re-authentication of the supplicant for the specified port.

Format

no dot1x re-authentication

Mode

Interface Config

2.10.12

dot1x system-auth-control

Use this command to enable the dot1x authentication support on the switch. While
disabled, the dot1x configuration is retained and can be changed, but is not activated.

Default

disabled

Format

dot1x system-auth-control

Mode

Global Config

2.10.12.1

no dot1x system-auth-control

This command is used to disable the dot1x authentication support on the switch.

Format

no dot1x system-auth-control

Mode

Global Config

2.10.13

dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state
machine on this port. Depending on the token used and the value (in seconds) passed,
various timeout configurable parameters are set. The following tokens are supported.

reauth-period - The value, in seconds, of the timer used by the authenticator state
machine on this port to determine when re-authentication of the supplicant takes place.
The reauth-period must be a value in the range 1 - 65535.

quiet-period - The value, in seconds, of the timer used by the authenticator state
machine on this port to define periods of time in which it will not attempt to acquire a
supplicant. The quiet-period must be a value in the range 0 - 65535.

tx-period - The value, in seconds, of the timer used by the authenticator state machine
on this port to determine when to send an EAPOL EAP Request/Identity frame to the
supplicant. The quiet-period must be a value in the range 1 - 65535.

supp-timeout - The value, in seconds, of the timer used by the authenticator state
machine on this port to timeout the supplicant. The supp-timeout must be a value in the
range 1 - 65535.

Advertising