Kontron AT8402 CLI - Manual (Page 86)

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 54
2.12.6.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
no port lacpmode
Mode Interface Config
2.12.7 port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format port lacpmode all
Mode Global Config
2.12.7.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
no port lacpmode all
Mode Global Config
2.12.8 port lacp timeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type
(actor or partner) to either long or short timeout.
Default long
Format port lacp timeout {actor | partner} {long | short}
Mode Interface Config
2.12.8.1 no port lacp timeout
This command sets the timeout back to its default value on a physical interface of a
particular device type (actor or partner).
Format
no port lacp timeout
{actor | partner}
Mode Interface Config
2.12.9 port lacp timeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or
partner) to either long or short timeout.
Default long
Format port lacp timeout {actor | partner} {long | short}
Mode Global Config
2.12.9.1 no port lacp timeout
This command sets the timeout for all physical interfaces of a particular device type
(actor or partner) back to their default values.
Format
no port lacp timeout
{actor | partner}